Welded U Type Tee

Welded U Type Tee is a type of pipe fitting primarily used in main pipelines where branching is required. The U-shaped tee is processed using polishing equipment to meet surface precision requirements. Welded U-shaped pipes are suitable for stainless steel piping systems in industries such as dairy, food, beer, beverages, pharmaceuticals, cosmetics, and more.

To better understand the dimensions of a Welded U Type Tee, we can refer to some specific samples. Below is the dimensional data for a typical stainless steel U-shaped tee:

● Main pipe diameter: DN50 (2 inches)

● Branch pipe diameter: DN40 (1.5 inches)

● Distance from center to end port: 100mm

Please note that actual products may vary slightly due to differences in manufacturers and production processes. Always refer to detailed dimension charts and technical specifications.

The connection process is as follows:

1.Preparation

2.Clean the connection points

3.Plan the connection points, cut, and process the pipe segments

4.Connect the pipe segments

5.Secure the pipe segments

6.Perform the welding operation

7.Verify the connection

8.Clean and apply paint treatment

These steps are the basic operations for Welded U Type Tees in general cases. Please follow the specific requirements and material standards, and ensure compliance with safety procedures and relevant standards.