What Is A Y Branch Tee?

A y branch tee, also known as a slant tee or a slant insert tee, is a pipe fitting accessory for branching out of irregular piping systems. Because of its irregularity, it is often made with the optional welding process, or welded on-site. Tee y fitting will tee the branch pipe and the main pipe angle design into one side of the acute angle, the other side of the obtuse angle, with acute angle ā between 30 ° -60 °, thus overcoming the above defects, with reduced resistance, not easy to appear turbulent flow, not easy to appear the surge of resistance, and the field welding production. Not easy to appear turbulent flow, not easy to surge resistance, good stability, reduce energy consumption and other advantages.

Tee y branch is the metal parts of the hydraulic system pipeline connection, so that the liquid can smoothly enter into the respective independent branch system pipeline, relying on the hydraulic components and actuators to achieve the hydraulic bracket required for a variety of actions, the three heads can be connected to the hose connector. It is used in various pipelines of the hydraulic system and between valves and tubes, etc. As one of the important metal fittings of the hydraulic support of mining equipment, Y tee is indispensable for each support. In order to protect the Y-type tee, we need to pay attention. When in transport, installation or use, to protect the pipe joints from damage, rust and corrosion, etc., pipe joint holes should be protected with plastic caps and plugs, and can only be removed when installed at the work site. When disassembling or replacing parts of Y-type tee, it should be operated after unloading the relevant hydraulic cylinder to prevent injury. Before connecting each hydraulic pipeline, release a little emulsion to flush the system and hydraulic parts to avoid spoils from being brought into the system. In the maintenance work, never disassemble with pressure, need to disassemble and replace, must close the main inlet pipeline.